Union J2100REB Rebate Kit To Suit Strongbolt Deadlocks
In stock
Delivery Information
| Delivery Time Frame | Delivery Information |
| Next Working Day By 1PM | When an order is placed by 3pm for next working day on certain items |
| Standard Delivery | Usually delivered in 2 to 4 working days |
| Delivery Charges | |
| UK Mainland | Prices start at £3.95 for very small items, £6.50 for small, £9.50 for medium and £20 for large/long items |
| Scottish Highlands & Islands, Northern Ireland & Ireland | Prices from £30, please see our delivery page for more info. |
See our full range:
Description
Union J2100REB Rebate Kit To Suit Strongbolt Deadlocks
Installing standard mortice locks on rebated timber doors presents a significant challenge for joiners and hardware installers because the door profile does not offer a flat meeting point for the strike plate or the latch face. This professional-grade rebate kit addresses that mechanical gap by providing the necessary components to seat your Union Strongbolt deadlocks perfectly into the stepped edge of the door frame.
Crafted to maintain the structural integrity and security profile of the original locking system, this kit ensures that your security hardware operates with the intended resistance and accuracy. You can choose between polished lacquered brass or satin chrome finishes which allows you to match the aesthetic requirements of your existing ironmongery while achieving a level of technical precision that keeps the mechanism shielded from external interference.
Why Choose the Union J2100REB Rebate Kit To Suit Strongbolt Deadlocks?
These kits provide a precise mechanical solution for fixing locks onto stepped door edges without compromising the performance of your security setup.
Specific Mechanical Alignment
The internal components are shaped to wrap around the rebate profile so the bolt can throw into the keep without rubbing against the door timber. This level of accuracy prevents early mechanical wear and stops the lock from binding during daily operation which is a common issue when using generic or poorly fitted hardware solutions.
Finish Integrity
Selecting the correct finish means your door furniture remains visually consistent throughout the property. Whether your interior design calls for the warm tones of polished brass or the modern utility of satin chrome, this kit ensures that the visible metalwork around the deadbolt entry point looks clean, professional, and entirely factory-finished.
System Integration
These components are purpose-built for the Union Strongbolt range so you do not have to worry about dimensional mismatches or hardware incompatibility. Because they are genuine Union products, you benefit from the brand reputation for long-term reliability and precise engineering standards that trade professionals expect when working on high-traffic or residential door projects.
Engineering Quality and Daily Performance
High-grade materials and precise manufacturing ensure that your deadlock functions perfectly every time the door is secured.
Precision Engineering Standards
The construction of this kit relies on tight manufacturing tolerances which allow the lock faceplate to sit flush within the rebated door edge. By filling the void created by the rebate, the kit creates a continuous metal surface that supports the bolt mechanism and distributes force evenly whenever the door is under pressure or locked tight against the frame.
Because the pieces are machined to match the specific dimensions of Strongbolt deadlocks, you gain an installation that feels solid and secure under load. This avoids the rattling or misalignment often found with universal kits because the metal plates are contoured exactly to follow the profile of the door rebate and the lock face.
Durability and Surface Protection
The metal alloys used in these kits are selected for their resistance to daily wear and their ability to hold a finish for years of frequent use. Both the polished lacquered brass and the satin chrome finishes act as a protective barrier against moisture and air exposure which helps keep the hardware looking fresh and prevents oxidisation.
You will find that these finishes are highly resistant to scratching from keys or general impact which makes them an ideal choice for busy commercial settings or high-traffic home entry points. The consistent coating process means there is no risk of flaking or peeling provided the installation is handled with standard care and the plates are fixed securely to the timber.
Installation and Operational Workflow
Proper fitting of these components requires a careful approach to ensure the bolt throw remains unobstructed within the rebated timber.
Rebate Assessment
Measure the existing rebate on your door edge to ensure the kit you choose matches the 13mm or 25mm dimensions. Clear away any loose wood fibres from the cut-out area so that the rebate plates seat fully against the timber without any wobbling or uneven gaps that might interfere with the lock alignment later.
Plate Positioning
Align the rebate plates over the mortice cut-out so the screw holes line up with the pre-drilled points on the lock case. Use the provided fasteners to secure the plates firmly into the timber, checking frequently to ensure the metal edges follow the line of the door profile and do not protrude beyond the surface.
Functional Testing
Operate the deadlock key through the full throw cycle to observe the movement of the bolt. If the bolt moves freely without scraping against the plate edges, the installation is complete, though you should check the strike plate on the frame one final time to verify smooth engagement without any friction or resistance.
Expert Installation and Care Tip
When you are tightening the mounting screws, use a hand screwdriver rather than a power drill to avoid stripping the timber or overtightening the plates. For finish care, wipe the surface occasionally with a soft, dry cloth to remove oils or dust, which preserves the clear lacquer on the brass or the sheen on the chrome.
Technical Specifications
| Feature | Rating / Standard | Practical Details |
|---|---|---|
| Compatibility | Union Strongbolt | Designed specifically for current Strongbolt mortice deadlock series. |
| Finish Options | Brass or Chrome | Available in polished lacquered brass or high-quality satin chrome. |
| Rebate Depths | 13mm or 25mm | Standard sizes available to suit most common timber door rebates. |
Longevity and Trade Reliability
These components are manufactured to the high standards required for architectural ironmongery and represent a long-term investment in your building security. By opting for official manufacturer accessories, you ensure your hardware remains easy to maintain and consistent in its performance over many years of service.

