Exidor 322 Outside Access Device Silver

Exidor 322 Outside Access Device Silver Euro Cylinder

Application uses

The Exidor 322 with lever allows for the provision of secure access into a building from the outside without compromising the functionality of the escape hardware

Suitable for use with the Exidor 200 & 300 series bolts and latches.

The Exidor 322 offers access from the outside of the door

All the Exidor 200/300 series Outside Access Devices have been certified for use with the Exidor 200/300 range of bolts and latches. The use of any other OAD will invalidate the CE marking on these products.

Operation

• When unlocked the lever, spindle and mechanism engage allowing the shoots of the panic bolt or the bolt in the panic latch to be withdrawn from the outside
• The lever remains engaged until the mechanism is re-locked
• When the door is locked, the handle is fixed in the horizontal position - preventing access from outside the building

Features

• Lever is attached to the body by a shear pin. In the event of severe abuse, the shear pin will break protecting the mechanism. The shear pin can then be replaced
• Non-handed
• Fire rated for use on timber and steel doors
• Surface mounted on the outside of the door using concealed machine screws
• Supplied as standard for doors up to 55mm thick
• Supplied with euro cylinder & 3 keys
• Manufactured in the UK

Standards

• CE Marked
• Certifire Tested
• Assists with DDA compliance and meets dimensional requirements of BSB300 and approved document M

Fixing / Installation

Installation instructions are supplied with all the Exidor panic and emergency exit hardware. Provided the instructions are followed and the units are fitted by a competent person, the Exidor range will offer a high degree of safety and security

Not sure if this Panic Hardware is right for your requirements? 

If you are not sure if this panic hardware is right for your requirements please contact our friendly team today.