Exitex Surface Mounted Intumescent Self Adhesive Strip 1/2 HR 5.2m Roll
In stock
Delivery Information
| Delivery Time Frame | Delivery Information |
| Next Working Day By 1PM | When an order is placed by 3pm for next working day on certain items |
| Standard Delivery | Usually delivered in 2 to 4 working days |
| Delivery Charges | |
| UK Mainland | Prices start at £3.95 for very small items, £6.50 for small, £9.50 for medium and £20 for large/long items |
| Scottish Highlands & Islands, Northern Ireland & Ireland | Prices from £30, please see our delivery page for more info. |
-
save
Description
Exitex Surface Mounted Intumescent Self Adhesive Strip 1/2 HR 5.2m Roll
Modern building regulations often demand efficient upgrades to existing timber fire doors which makes this Exitex surface mounted strip a highly effective solution for professionals and property managers alike. This product avoids the need for complex machining or manual routing into door frames because it features a high-performance adhesive backing that allows for rapid application during renovation projects or routine fire safety maintenance schedules.
You will appreciate the finished look of this strip as it combines a discreet profile with a colour coded brush that blends into your interior timberwork while providing a necessary barrier against smoke and fire gases. Every roll delivers a consistent 5.2 metres of material so that you can easily seal the gaps around standard door sets and meet the stringent requirements of BS 476 Part 22 standards for half-hour rated doors.
Why Choose the Exitex Surface Mounted Intumescent Self Adhesive Strip 1/2 HR 5.2m Roll?
Improve the safety profile of your fire doors with a solution that prioritises speed, ease of use, and verified compliance.
Speedy Installation Workflow
Traditional hardware often requires you to remove the door and use specialist routers to create channels for protection products. This surface mounted alternative removes that requirement entirely so that you can update an entire building of fire doors within a fraction of the time normally spent on these essential safety compliance tasks.
Verified Fire Safety Compliance
Safety is the primary reason you choose this product because it has undergone rigorous testing for 30 minutes in accordance with BS 476 Part 22. It also meets the necessary smoke criteria defined in BS EN 1634 so that your installation satisfies building control officers and ensures the safety of building occupants.
Adaptable and Discreet Aesthetic
The brush seal is designed with a neutral finish that complements various timber textures and stains commonly found in residential or office environments. Because the profile remains low when the door is closed, you gain professional protection without altering the visual character of the door or the surrounding frame architecture in any way.
Engineering Quality and Daily Performance
Engineered to provide a stable barrier, this strip uses advanced materials that expand reliably during a fire event.
Material Science and Expansion Properties
The core material within this strip is designed to activate at precise temperatures if a fire occurs. This chemical reaction triggers a rapid expansion that fills the gaps between the door and the frame so that hot gases and flames are effectively contained in the room of origin for at least thirty minutes.
This controlled expansion happens along the entire length of the seal because the internal chemistry is balanced to react uniformly. You can rely on the structural integrity of this barrier during an emergency situation, which provides the necessary time for building evacuation and reduces potential property damage significantly.
Durability and Adhesion Technology
The adhesive layer on the back of this product is formulated to bond securely to timber, metal, or painted surfaces with minimal preparation required beyond basic cleaning. It resists peeling over time, which means that you avoid the frustration of having to repair seals that lose their grip in high-traffic commercial doorways.
The brush component is made from synthetic fibres that remain flexible throughout their service life. These fibres maintain a consistent seal against the door leaf without causing friction during daily operation, so that your doors continue to open and close smoothly even after years of continuous use within your premises.
Installation and Operational Workflow
Follow these practical steps to ensure a secure fit that lasts for the lifetime of your door hardware.
Preparation of Surfaces
Use the included alcohol wipe to thoroughly clean the door frame area where you plan to stick the seal. You must remove all traces of dust, grease, or old paint residues because a pristine surface is the only way to achieve the long-term bond required for fire safety hardware to perform correctly.
Measurement and Positioning
Peel back a small section of the adhesive liner and align the strip carefully against the door stop on the frame. Apply the strip in a continuous line along the top and sides, making sure that you provide a snug fit against the hinges and latch plates for complete protection coverage.
Fine Cutting and Curing
Use a sharp knife to carefully cut around the latch plate and corners to ensure the door can engage correctly. After you have fitted the entire length, allow the adhesive to cure overnight without using the door so that the bond reaches its full strength before it faces daily wear and tear.
Expert Installation and Care Tip
When installing, always apply firm pressure across the length of the strip using a smooth block or roller to remove trapped air bubbles. This simple action maximises the surface contact of the adhesive, which prevents the strip from lifting during seasonal fluctuations in temperature or humidity.
Technical Specifications
| Feature | Rating / Standard | Practical Details |
|---|---|---|
| Fire Performance | 30 Minutes (BS 476) | Tested for use on timber doors in compliance with building regulations for 30-minute ratings. |
| Smoke Control | BS EN 1634-3:2004 | The integrated brush helps restrict the passage of cold smoke through gaps in the door set. |
| Gap Tolerance | 2mm to 4mm | Optimised for standard gaps found in most domestic and commercial door installations. |
| Supplied Length | 5.2 Metres | Standard roll length sufficient for one full-size single door frame application. |
Longevity and Trade Reliability
This Exitex solution is manufactured for consistent long-term performance under normal environmental conditions. By selecting this product, you invest in a reliable fire safety component that remains effective without the need for constant maintenance or frequent replacement cycles.

