Apply Discount Code
MABPR6761
165 x 89mm Plain Slotted Vent Aluminium PR6761
Main image
Click to view image in fullscreen
![]()
165 x 89mm Plain Slotted Vent Aluminium PR6761
In stock
Delivery Information
| Delivery Time Frame | Delivery Information |
| Next Working Day By 1PM | When an order is placed by 3pm for next working day on certain items |
| Standard Delivery | Usually delivered in 2 to 4 working days |
| Delivery Charges | |
| UK Mainland | Prices start at £3.95 for very small items, £6.50 for small, £9.50 for medium and £20 for large/long items |
| Scottish Highlands & Islands, Northern Ireland & Ireland | Prices from £30, please see our delivery page for more info. |
View Delivery Information
£3.34
Incl. VAT
£2.78
Excl. VAT
Incl. VAT
Excl. VAT
Incl. VAT
Excl. VAT
Price is for/per each
-
+
See our full range:
Description
Reliable Passive Ventilation for Healthier Interior and Exterior Spaces
Uncontrolled humidity, stagnant air, and trapped moisture create significant issues across both domestic homes and commercial buildings. When air cannot circulate naturally through rooms, cupboards, utility areas, or damp wall cavities, condensation rapidly builds up. Over time, this trapped vapour causes unsightly surface mould, unpleasant musty odours, and even costly structural damage to joinery and plasterwork. Addressing these daily ventilation headaches requires a dependable, maintenance-free fixture that provides constant air exchange without relying on noisy electrical systems or complex mechanical ducting networks.
The 165 x 89mm Plain Slotted Vent Aluminium PR6761 delivers an exceptionally neat and hardwearing solution for spaces that require unrestricted natural ventilation. Manufactured from sturdy 1.5mm thick aluminium with an attractive satin finish, this surface-mounted grille enables air to move freely across partitions, cabinet fronts, and external boundaries. Whether you are balancing ambient indoor temperatures, assisting background air extraction, or protecting damp-prone areas, this unit combines simple installation with reliable long-term performance.
Designed for straightforward surface mounting, this compact rectangular grille covers apertures cleanly while preserving a smart architectural aesthetic. The precision-stamped parallel slots maximise free airflow area without leaving large gaps that could expose unsightly wall voids or internal framing. It serves as an essential component for builders, landlords, and facility managers looking to keep properties well ventilated, fresh, and fully compliant with modern environmental comfort standards.
Key Operational Advantages
Explore how the thoughtful design and durable material specification of this ventilator grille enhance airflow throughout your property.
Continuous Passive Air Circulation
The open slotted configuration facilitates an unobstructed exchange of ambient air across rooms, cupboards, and service ducts. By allowing stale air to escape and fresh air to enter without mechanical restriction, it helps balance interior pressure, reduces relative humidity, and actively deters mould growth over damp sections.
Robust 1.5mm Aluminium Construction
Crafted from rigid 1.5mm thick aluminium, the grille resists bowing, twisting, and accidental impact during handling and everyday use. Aluminium naturally generates a protective oxide layer, making this vent impervious to rust and well suited for moist environments including bathrooms, laundry rooms, and sheltered exterior elevations.
Versatile Dual Environment Suitability
Engineered for both interior and exterior mounting, this unit performs reliably on partition walls, timber doors, soffits, and exterior cladding. The neutral satin aluminium finish complements diverse architectural schemes, pairing effortlessly with modern commercial offices as well as traditional residential decors.
Simple Surface Installation
The face of the plate comes pre-drilled for fast screw fixing directly against flat surfaces. There is no need for deep internal rebates or intricate framing channels, allowing tradespeople and DIY renovators to fit the plate securely over rough openings within just a few minutes using standard fixings.
Detailed Installation and Application Guide
Following clear fitting steps ensures optimal airflow performance and a tidy, secure finish on any mounting surface.
Stage 1: Aperture Preparation and Sizing
Ensure the wall, door, or cabinet cutout remains slightly smaller than the 165mm by 89mm external boundaries of the vent. This ensures the aluminium rim provides clean edge overlap to conceal rough cuts while maintaining complete slot clearance for unrestricted movement of air.
Stage 2: Surface Alignment and Pilot Drilling
Place the grille squarely over the prepared opening using a spirit level to check alignment. Mark your fixing points through the pre-drilled screw holes. Drill small pilot holes into the timber, masonry, or board substrate to prevent splitting and ensure the screws drive in straight.
Stage 3: Fastening and Surface Sealing
Secure the vent flush to the substrate using compatible countersunk screws. For exposed exterior facades or moisture-heavy wet rooms, apply a fine bead of neutral perimeter sealant behind the rim to prevent water penetration behind the plate without obstructing any slotted passages.
Stage 4: Commissioning and Routine Cleaning
Once fastened, verify that airflow passes freely through the horizontal slots. Keep the satin aluminium surface performing at its best by wiping it down periodically with a damp lint-free cloth and mild soapy detergent, clearing any accumulated domestic dust or airborne lint.
Ideal Environments and Use Cases
The compact footprint of the 165 x 89mm Plain Slotted Vent Aluminium PR6761 makes it one of the most adaptable ventilation grilles available. It fits neatly into standard stud walls, domestic boiler cupboards, and office storage zones where space is at a premium but air renewal remains essential.
- Kitchens and Pantries: Assists passive ventilation behind kitchen base units, larder cupboards, and refrigeration voids to dissipate heat build-up and cooking aromas.
- Bathrooms and Utility Rooms: Relieves damp conditions by facilitating cross-flow ventilation across partitions and airing cupboard doors, curbing continuous condensation.
- Commercial Offices: Provides clean air balancing between private offices, server cupboards, and communal hallways, integrating smoothly with secondary HVAC and air conditioning systems.
- Damp-Prone Cavities and Underfloor Voids: Promotes consistent background drying across cellars, crawlspaces, and enclosed boxed-in pipe runs subject to trapped ground humidity.
- Exterior Soffits and Timber Cladding: Delivers outdoor weather-resistant airflow into roof voids and external eaves while preventing trapped damp within exterior timbers.
Technical Specifications
| Specification | Rating or Standard | Practical Details |
|---|---|---|
| Product Model | PR6761 | Catalogue reference code for Doorfit stock allocation |
| Overall Width | 165mm | Horizontal outer face plate measurement |
| Overall Height | 89mm | Vertical outer face plate measurement |
| Material Thickness | 1.5mm Plate | Sturdy, warp-resistant profile for durable mounting |
| Material Type | Grade Aluminium | Inherent rust resistance for wet or outdoor locations |
| Surface Finish | Satin Aluminium | Low-reflective, modern brushed appearance |
| Ventilation Type | Open Slotted Free Airflow | Continuous natural air exchange without moving parts |
| Mounting Format | Surface Mounted | Pre-drilled countersunk holes for standard screw fixings |
| Packaging Unit | Sold Individually | Each unit supplied as an individual ventilation plate |
Need Advice on Your Ventilation Project?
Selecting the exact grille size and airflow capacity for your doors, walls, or damp remediation work can sometimes be tricky. The experienced team at Doorfit is always on hand to discuss your building requirements, bulk orders, and ironmongery specifications.
Contact Our TeamSpecification
| Finish | Satin Anodised Aluminium |
|---|---|
| Dimensions | 165 x 89mm |