4 x 1/2" Pozidriv CSK Wood Screws Zinc (Box of 200)
In stock
Delivery Information
| Delivery Time Frame | Delivery Information |
| Next Working Day By 1PM | When an order is placed by 3pm for next working day on certain items |
| Standard Delivery | Usually delivered in 2 to 4 working days |
| Delivery Charges | |
| UK Mainland | Prices start at £3.95 for very small items, £6.50 for small, £9.50 for medium and £20 for large/long items |
| Scottish Highlands & Islands, Northern Ireland & Ireland | Prices from £30, please see our delivery page for more info. |
See our full range:
Description
Reliable Fastening with 4 x 1/2" Pozidriv CSK Wood Screws Zinc
Securing delicate timber mouldings, lightweight ironmongery, or compact hardware components often presents a tricky trade balance. Traditional single-thread fixings frequently take too long to bite into dense materials, while blunt screws run the risk of splitting softwoods or chewing up the substrate. Tradespeople and enthusiastic home renovators alike need a small screw that starts without drama, pulls down flush, and provides dependable holding force every single time.
The 4 x 1/2" Pozidriv CSK Wood Screws Zinc (Box of 200) offer an effective, practical solution to these common workshop and worksite frustrations. Manufactured with an aggressive twin-thread design and a sharp single lead start, these compact fasteners bite immediately into timber and pull home cleanly without wandering. The double countersunk head reinforces the join where the shank meets the head, preventing frustrating head shear when you drive them firmly into place.
Supplied in an economical trade pack of 200 pieces, these screws are perfectly proportioned for compact hardware fixings, cabinet assembly, and domestic repairs. Whether you are fixing brass brackets to softwood frames or anchoring lightweight fittings into masonry with compatible wall plugs, this fixing pack provides steady, repeatable quality that keeps everyday joinery jobs moving quickly.
Key Features and Everyday Advantages
Engineered for quick engagement, reliable alignment, and clean surface finishes.
Twin-Thread Performance
Featuring two parallel threads running down the shank, these screws drive into the timber at twice the speed of traditional single-thread alternatives. This configuration drastically shortens installation times across large runs while delivering substantial resistance against pull-out loads.
Pozidriv Recess Engagement
The precision PZ1 recess offers parallel drive walls that dramatically reduce cam-out. Your driver bit locks in firmly without slipping, protecting the bright zinc surface from damage and ensuring your power tool transmits smooth rotational torque throughout the entire drive.
Double Countersunk Head
The reinforced underside of the head adds critical strength right at the head-to-shank junction. This extra bulk prevents the head from snapping under driving torque and helps pull the head down completely level with timber surfaces for an unobtrusive finish.
Fast 25 Degree Point
A ground 25 degree point coupled with a sharp single lead thread provides an instant initial bite. The fastener grabs the timber grain without skidding across delicate wooden faces, allowing you to position smaller hardware parts with total confidence.
Stage-by-Stage Execution Pipeline
Follow these four clear steps to achieve neat, reliable joins across light joinery and masonry work.
Stage 1. Substrate Preparation
Mark your fixing points carefully with a pencil or awl. When working near thin board edges or using seasoned hardwoods, consider creating a pilot prick or small clearance hole to keep the grain from lifting under load.
Stage 2. Hardware Alignment
Position the component, hinge, or bracket squarely against the workpiece. Check that the countersunk holes in the hardware correspond with the shallow double countersink shape of the screw head to ensure a neat, tidy fit.
Stage 3. Controlled Driving
Insert a correct size Number 1 Pozidriv bit into your hand driver or power tool. Maintain direct forward pressure as you begin the drive, allowing the twin thread to pull the fastener smoothly into the wood.
Stage 4. Final Seat and Inspection
Ease off driving pressure just as the countersunk head touches the surface or bracket recess. Run a fingertip across the head to confirm it sits flush without over-tightening or stripping the delicate timber grain.
Technical Specifications
| Specification | Rating or Standard | Practical Details |
|---|---|---|
| Imperial Dimensions | 4 Gauge x 1/2 Inch Length | Compact shank diameter suitable for light hardware fittings and trim. |
| Metric Equivalent | 3.0 mm x 12 mm | Ideal metric dimensions for low-profile internal applications. |
| Drive System | Pozidriv Cross Recess PZ1 | Use a PZ1 driver bit to prevent head wear and bit slip under load. |
| Head Profile | Double Countersunk | Reinforced head design resists shear and pulls down smooth against components. |
| Thread Pattern | 60 Degree Twin-Thread | Parallel shank format providing double the insertion speed of single threads. |
| Point Style | 25 Degree Sharp Point | Single lead start achieves rapid thread acceptance without wandering. |
| Finish and Plating | Zinc Plated | Offers basic corrosion protection for interior carpentry and dry environments. |
| Pack Quantity | Box of 200 | Supplied in a sturdy container suitable for workshop shelving or tool bags. |
Versatile Trade Applications
Because of their small gauge and fast penetration, these screws are exceptionally useful across numerous commercial and domestic situations. Typical applications include the following tasks.
- Mounting small surface-mounted ironmongery, cupboard catches, and decorative brassware.
- Fitting lightweight hinges on wooden craft boxes, small cabinet doors, and access hatches.
- Securing thin timber beadings, decorative mouldings, and delicate trim boards without split risks.
- Fastening electrical patress boxes or lightweight components into plastered masonry with plastic plugs.
- General bench joinery and general maintenance jobs requiring clean, low-profile mechanical anchors.
Not Sure If This Fixing Is Right For Your Requirements?
Every project presents unique physical demands. If you require expert guidance on screw gauges, lengths, or compatible plugs for your specific substrate, please contact our friendly Doorfit team today.
Contact Our TeamSpecification
| Manufacturer | Timco |
|---|---|
| Finish | Zinc |

