4 x 1" Pozidriv CSK Wood Screws Zinc (Box of 200)
In stock
Delivery Information
| Delivery Time Frame | Delivery Information |
| Next Working Day By 1PM | When an order is placed by 3pm for next working day on certain items |
| Standard Delivery | Usually delivered in 2 to 4 working days |
| Delivery Charges | |
| UK Mainland | Prices start at £3.95 for very small items, £6.50 for small, £9.50 for medium and £20 for large/long items |
| Scottish Highlands & Islands, Northern Ireland & Ireland | Prices from £30, please see our delivery page for more info. |
See our full range:
Description
Reliable Joinery Fixings with 4 x 1 Inch Pozidriv Countersunk Wood Screws
Every tradesperson and home improvement enthusiast knows the daily irritation of working with sub-standard timber fixings. Stripped screw heads, warped shanks, split timber grains, and sluggish insertion speeds can quickly derail a joinery project. When you need to install multiple fastenings across a job, running into stripped drive recesses causes unnecessary downtime and frustrates the workflow. The 4 x 1" Pozidriv CSK Wood Screws Zinc (Box of 200) deliver a dependable fixing engineered to overcome these common carpentry headaches, providing smooth and consistent fastening into softwoods, board materials, and masonry plugs.
Manufactured with a traditional twin-thread profile and a precision 25-degree sharp point, these screws draw down cleanly into the timber grain with minimal effort. The balanced double-countersunk head spreads surface pressure smoothly to resist head shear under torque, while ensuring the head sits perfectly flush with your timber face for a clean, professional surface ready for sanding or finishing. Supplied in a generous trade box of 200 pieces, these versatile 3.0mm by 25mm fasteners serve as an indispensable stock item in any workshop, van, or on-site toolkit.
Step-by-Step Installation and Performance Pipeline
Stage 1: Instant Point Location and Fast Starting
The fine 25-degree sharp point and single leading thread bite immediately into natural timber surfaces. This sharp geometry eliminates annoying tip skidding on smooth materials, giving you immediate purchase and allowing precise positioning on your marked measurement points without needing a pilot hole in soft timber.
Stage 2: Positive Bit Engagement and Cam-Out Prevention
The precision-stamped PZ1 cross-recess ensures your driver bit sits deep and square into the screw head. By providing four additional radial points of contact compared to traditional slots or basic Phillips heads, this design distributes drive torque evenly and prevents driver slip during rapid power driving.
Stage 3: Rapid Driving with High Pull-Out Resistance
Featuring steep 60-degree twin-threads alongside a parallel shank, this screw advances into the timber at twice the speed of single-thread alternatives per rotation. The dual-start spiral cuts clean internal mating threads, delivering high holding strength and exceptional resistance against pull-out forces.
Stage 4: Flush Double Countersunk Seating
As the screw completes its path into the wood, the double countersunk profile gently clears the top fibres. The reinforced transitional neck distributes final tightening stress safely, helping prevent head snap and pulling down neatly flush with the surrounding surface for a seamless decorative appearance.
Key Features and Material Benefits
The 4 x 1" Pozidriv CSK Wood Screws Zinc (Box of 200) pack is built for trade-level productivity. These screws feature several integrated engineering enhancements that streamline routine carpentry work.
- Twin-Thread Geometry: The twin-thread profile incorporates two parallel threads running in tandem along the shank. This cuts insertion time in half and provides excellent mechanical engagement within soft timber fibres and particleboards.
- Double Countersunk Head: The reinforced angle under the head strengthens the shank-to-head junction. This extra steel volume significantly reduces the risk of head shear when driving screws firmly into tough framing timber or dense sheet materials.
- Protective Zinc Electroplating: Finished with a clean, bright zinc coating that provides essential surface protection against indoor humidity and oxidation, keeping fixings rust-free and looking tidy.
- Universal Application Versatility: Suitable for softwood battens, light cabinet assemblies, thin timber mouldings, and general framing work, or matched with plastic wall plugs for masonry fixing tasks.
- Standard PZ1 Recess: Compatible with all standard Number 1 Pozidriv screwdriver bits and bit holders, making it simple to run through standard cordless combi drills and impact drivers without switching special accessories.
Detailed Specifications
The following technical parameters outline the exact sizing, drive requirements, and physical properties for this product.
Recommended Applications and Practical Advice
Because of their slender 4-gauge shank and practical 1-inch length, these screws are exceptionally useful across general interior woodworking and light fixture installations. They are commonly specified for fixing decorative beading, picture rails, architraves, electrical dry lining boxes, light bracket mountings, and lightweight wooden cabinets. The slender diameter minimises the internal outward pressure in the wood, making it easier to install near the edge of thinner timber boards where splitting can be an issue.
For masonry installations into brickwork, blockwork, or poured concrete, these screws pair smoothly with matching plastic wall plugs. Simply drill your wall using the appropriate masonry bit, insert your wall plug, and drive the screw into place. The deep twin-threads bite firmly into the expanding nylon or plastic plug ribs, creating solid holding power for lightweight shelving supports, hooks, and domestic hardware fittings.
Trade Fitting Tip: For the best results and longest bit life, always ensure your power screwdriver clutch is set to an appropriate torque setting. While the Pozidriv recess dramatically cuts down on cam-out slippage, matching the clutch to the timber density prevents over-sinking the double countersunk head beyond the surface of delicate softwoods.
Need Advice on Selecting the Right Screws or Fixings?
If you are unsure whether this 4 x 1 inch fixing meets the specific load, material, or size requirements of your current project, our knowledgeable team is here to assist you with friendly, professional advice.
Contact Our TeamSpecification
| Manufacturer | Timco |
|---|---|
| Finish | Zinc |

