6 x 1/2" Pozidriv CSK Wood Screws Zinc (Box of 200)
In stock
Delivery Information
| Delivery Time Frame | Delivery Information |
| Next Working Day By 1PM | When an order is placed by 3pm for next working day on certain items |
| Standard Delivery | Usually delivered in 2 to 4 working days |
| Delivery Charges | |
| UK Mainland | Prices start at £3.95 for very small items, £6.50 for small, £9.50 for medium and £20 for large/long items |
| Scottish Highlands & Islands, Northern Ireland & Ireland | Prices from £30, please see our delivery page for more info. |
See our full range:
Description
High Performance Fastening for General Joinery and Fitting
Securing hardware to timber or setting lightweight brackets into masonry plugs often presents irritating challenges on site. Tradespeople and enthusiastic home renovators frequently battle with soft metal screws that strip under pressure, binding shanks that tear timber fibres, and blunt tips that skate off accurate pencil marks. When you are fitting small ironmongery, cupboard catches, surface hinges, or modest repair plates, you need a fastener that bites instantly and sits neatly flush without shearing under reasonable hand or cordless driver torque.
The 6 x 1/2" Pozidriv CSK Wood Screws Zinc (Box of 200) deliver a reliable, no-nonsense solution tailored for everyday joinery tasks. Crafted to classic twin-thread wood screw standards, each fastener features a precision-machined 25 degree point that centres readily into natural timbers, composite sheet goods, or standard plastic wall plugs. The twin helix design draws material efficiently along the parallel shaft, halving installation time compared to traditional single-thread woodscrews and giving trades clear control throughout the drive.
Manufactured with a durable bright zinc plating, these screws resist early surface oxidation while providing a clean appearance that harmonises with standard zinc and nickel-finished architectural hardware. Supplied in a manageable trade box of 200 pieces, they represent a dependable staple fixing to keep in your site tool bag or workshop storage drawer, ready for quick repairs, cabinet making, and decorative bracket installations across commercial and domestic properties alike.
Key Features and Everyday Advantages
Double Countersunk Head
The double countersunk profile reinforces the junction between head and shank. This added metal mass limits head shear when driving into harder woods, while the angled underside compacts timber fibres for a tidy, flush fit in pre-drilled hinge countersinks.
Efficient Twin Thread
Two distinct thread ridges spiral down the parallel shank at a 60 degree angle. This geometry accelerates installation speed dramatically, pulling the fixing home with fewer driver rotations while maintaining consistent pull-out resistance inside porous timbers.
25 Degree Sharp Point
A ground 25 degree point features an immediate single lead start. It engages instantly with timber surfaces or plastic wall plugs, eliminating surface wandering and making pilot holes unnecessary in most soft timber applications.
Protective Zinc Plating
Coated in bright zinc passivate, these screws provide good resistance against everyday tarnishing and internal humidity. The polished finish blends effortlessly into matching bright steel and electro-brassed door hardware fixtures.
Installation and Fastening Pipeline
Stage 1 Material Check
Check your timber thickness or base substrate to ensure the short half-inch length provides adequate bite without punching through thin boards. If fixing into brickwork or plasterboard, select an appropriately sized plastic wall plug that matches the gauge.
Stage 2 Driver Selection
Use a clean, unrounded Pozidriv PZ2 bit or matching cross-recess hand screwdriver. Ensure a tight, perpendicular fit within the drive recess to eliminate cam-out and prevent damage to both the bit and screw head.
Stage 3 Initial Drive
Place the screw point against the target mark and apply moderate forward pressure. The 25 degree needle point and leading thread catch softwood grain immediately, drawing the shank inward on the very first turn without wandering off location.
Stage 4 Final Seating
Drive the screw smoothly until the double countersunk head seats level with the timber surface or inside the countersunk hole of your metal bracket. Avoid overtightening with high-torque impact drivers on soft timber stock.
Practical Applications Across Trade Projects
The compact size of these 6 x 1/2" Pozidriv CSK Wood Screws Zinc (Box of 200) makes them exceptionally versatile across domestic fittings, retail display builds, and workshop maintenance. At half an inch in length, approximately twelve millimetres, they are purpose-built for shallow fixing duties where standard three-quarter or one-inch screws would punch through the reverse side of thin panels.
- Fitting light duty surface hinges, roller catches, and magnetic push latches onto bespoke cabinets.
- Fastening decorative brassware, small faceplates, and escutcheons onto interior wooden doors.
- Attaching corner brackets, mending plates, and internal bracing to picture frames or timber craft projects.
- Anchoring cable clips, conduit saddles, and small electrical junction boxes to timber battening.
- Light duty perimeter fixing in masonry applications when paired with standard yellow or red plastic expansion wall plugs.
Detailed Specifications
| Specification | Rating or Standard | Practical Details |
|---|---|---|
| Screw Dimensions | Imperial 6 x 1/2 inch (Metric 3.5 x 12 mm) | Compact length ideal for thin timber materials and lightweight surface fittings |
| Recess Geometry | Cross-Recess Pozidriv PZ2 | Positive bit engagement reduces slippage and limits surface gouging |
| Head Configuration | Double Countersunk Flat Head | Strengthens neck joint against head shear and seats flush in countersunk hardware |
| Thread Pitch | 60 Degree Twin-Thread | Twin start provides rapid entry and firm grip across solid timber and composites |
| Tip Configuration | 25 Degree Sharp Point | Enables direct piercing into softwood without requiring prior pilot drill holes |
| Protective Finish | Bright Zinc Electroplated | General purpose corrosion resistance suitable for dry interior joinery environments |
| Pack Quantity | 200 Pieces per Box | Supplied in a sturdy box for site storage and mobile work van organisation |
Care and Usage Advice
While the sharp point easily pierces soft timbers such as pine, spruce, and cedar, drilling a small pilot hole is recommended when working close to the end grain or when driving into dense hardwoods like oak and ash. Pre-drilling prevents timber splitting and reduces friction on short shanks. For masonry applications, always match the screw gauge with a suitable wall plug, ensuring the plug is firmly seated into solid brick or blockwork before driving the screw home.
Keep your fixing boxes stored in dry, moisture-free conditions to maintain the clean zinc finish over time. Using an exact PZ2 driver bit rather than an old Phillips PH2 bit will safeguard the cross-recess from accidental rounding, making maintenance or eventual hardware adjustment smooth and effortless.
Not Sure if This Fixing Suits Your Requirements?
Selecting the correct screw gauge, thread profile, and coating is essential for long-lasting joinery installations. If you require expert advice on fixing lengths, load requirements, or complementary architectural hardware, our friendly team is ready to help.
Contact Our Team TodaySpecification
| Manufacturer | Timco |
|---|---|
| Finish | Zinc |

