8 X 1 1/4" Brass Pozidriv Csk Wood Screws
In stock
Delivery Information
| Delivery Time Frame | Delivery Information |
| Next Working Day By 1PM | When an order is placed by 3pm for next working day on certain items |
| Standard Delivery | Usually delivered in 2 to 4 working days |
| Delivery Charges | |
| UK Mainland | Prices start at £3.95 for very small items, £6.50 for small, £9.50 for medium and £20 for large/long items |
| Scottish Highlands & Islands, Northern Ireland & Ireland | Prices from £30, please see our delivery page for more info. |
See our full range:
Description
Reliable Traditional Fixing with 8 X 1 1/4" Brass Pozidriv Csk Wood Screws
Securing decorative brass architectural ironmongery, premium hardwood linings, and heritage timber mouldings presents unique craftsmanship challenges. Standard modern steel fixings often introduce unwanted chemical reactions when exposed to moisture, leading to unsightly corrosion bleed, wood staining, and compromised timber fibres. Using mismatched zinc-plated fasteners on exposed polished brass hardware creates an awkward, unfinished appearance that detracts from the quality of fine joinery work. Genuine solid brass fixings provide the essential balance of traditional material compatibility, natural corrosion resistance, and timeless aesthetic warmth required for professional interior joinery.
The 8 X 1 1/4" Brass Pozidriv Csk Wood Screws from Doorfit solve these installation hurdles by pairing traditional solid brass construction with modern drive geometry. Sized at number 8 gauge with an overall length of 32 millimetres, these screws provide the structural depth necessary for latch keeps, decorative butt hinges, sash furniture, and architectural timber trimmings. By incorporating a Pozidriv recess into the classic countersunk head, tradespeople can maintain positive driver engagement without sacrificing the flush, clean finish expected in heritage restorations and high-specification residential cabinetry projects.
Step by Step Installation Guide for Solid Brass Fixings
Stage 1 Marking and Timber Alignment
Accurate preparation ensures flush alignment and prevents surface marking on delicate timber mouldings. Align your brass hardware or joining timber precisely, then use an awl or fine bradawl to mark exact centre points. Maintaining true centres stops screws from creeping off angle during drilling, guaranteeing your finished hardware sits flat against the timber frame.
Stage 2 Accurate Pilot Hole Drilling
Solid brass is inherently softer than carbon steel and demands accurate pilot holes to prevent head shearing. Drill a pilot hole matching the root diameter of the screw throughout the full insertion depth. For dense hardwoods like oak or sapele, drill a matching clearance hole through the outer timber component to eliminate lateral friction.
Stage 3 Countersinking the Timber
To achieve an authentic flush surface finish, use a dedicated countersink bit to create a neat 90 degree seating chamfer. When fixing hardware directly, check that the screw head nests flush into the counterbore of the brass fitting. Clean away loose wood dust and shavings before presenting your fasteners for final driving.
Stage 4 Controlled Driving and Seating
Lubricate screw threads with beeswax or paraffin candle wax to lower friction, especially in seasoned hardwoods. Use a matched PZ2 Pozidriv screwdriver bit held straight and drive by hand or low-speed clutch drill. Tighten firmly until the countersunk head sits flush with the face, avoiding excessive torque to protect the drive recess.
Key Features and Practical Benefits
- Authentic Solid Brass Composition Built from solid brass without surface plating, ensuring natural resistance to atmospheric oxidation and preventing unsightly rust in kitchens, bathrooms, and marine locations.
- Improved Pozidriv Recess The PZ2 drive profile provides parallel internal drive faces and distinct corner indents, reducing cam-out risk compared to slotted alternatives while speeding up repeatable assembly.
- Classic Countersunk Profile The 90 degree countersunk head pulls clean into prepared timber or pre-drilled architectural fittings, delivering a smooth, trip-free, snag-free surface across all timber assemblies.
- Proportional 8 Gauge Dimensions The 4.2 millimetre outer gauge offers generous shear resistance and holding power, ideal for mid-weight architectural ironmongery such as cabinet latches, small hinges, and door fittings.
- Tapered Single Wood Screw Thread Features deep, sharp timber cutting threads designed to grip softwoods and dense hardwoods cleanly when fitted into properly prepared pilot drill holes.
Technical Specifications
| Specification | Rating or Standard | Practical Details |
|---|---|---|
| Product Description | 8 X 1 1/4" Wood Screw | Authentic brass fastener for quality architectural and furniture joinery |
| Gauge and Core Diameter | Number 8 Gauge (4.2 mm) | Standard imperial trade size suited to small hinges, plates, and catches |
| Fastener Length | 1 1/4 Inch (31.75 mm) | Measured overall from top of countersunk head to the sharp driving point |
| Base Material | Solid Brass Alloy | Non-magnetic, anti-corrosive, non-rusting metal for heritage and coastal use |
| Head Geometry | 90 Degree Countersunk | Sits flat into countersunk hardware counterbores and planed timber |
| Drive Configuration | Pozidriv (PZ2) | Positive cross drive ribs reduce driver slip and preserve brass heads |
| Thread Pattern | Gimlet Wood Thread | Coarse thread geometry tailored for positive engagement in timber fibers |
Frequently Asked Questions
Why should I choose solid brass screws over brass-plated steel?
Brass plated steel fasteners only carry a thin surface coating that can scratch away during installation. Once that outer layer is breached, moisture quickly attacks the underlying carbon steel, creating rust streaks that permanently spoil surrounding woodwork. Solid brass screws resist corrosion entirely, remaining rust free even when fitted in damp or coastal locations.
Is it necessary to pre-drill pilot holes before driving these screws?
Yes, pre-drilling is essential when installing brass fixings. Solid brass is naturally more malleable than hardened steel, making it susceptible to twisting or shearing if forced into solid timber without clearance. Drilling a pilot hole matching the core diameter of the screw prevents damage to both the screw and your timber joinery.
What size screwdriver bit should I use for these fixings?
These screws feature a standard number 2 Pozidriv recess. Always use a genuine PZ2 screwdriver or driver bit that fits firmly into the cross head. Avoid using Phillips or worn driver bits, as improper alignment can strip the drive recess.
Can these screws be used outdoors?
Solid brass offers outstanding natural weather resistance and does not rust outdoors. Over time, external exposure causes the polished brass to develop a mellow antique patina. If you wish to retain the bright golden finish outdoors, regular polishing or application of a clear protective wax is recommended.
Need Advice on Architectural Hardware and Fixings?
Our experienced technical sales team is on hand to help you choose the correct fixings, finishes, and quantities for your restoration or joinery project.
Contact Our TeamSpecification
| Finish | Brass |
|---|

