8 x 1/2" Pozidriv CSK Wood Screws Zinc (Box of 200)
In stock
Delivery Information
| Delivery Time Frame | Delivery Information |
| Next Working Day By 1PM | When an order is placed by 3pm for next working day on certain items |
| Standard Delivery | Usually delivered in 2 to 4 working days |
| Delivery Charges | |
| UK Mainland | Prices start at £3.95 for very small items, £6.50 for small, £9.50 for medium and £20 for large/long items |
| Scottish Highlands & Islands, Northern Ireland & Ireland | Prices from £30, please see our delivery page for more info. |
See our full range:
Description
Reliable Fixing Performance with 8 x 1/2" Pozidriv CSK Wood Screws Zinc
Fitting ironmongery, cabinet fittings, and architectural hardware requires a fastener that drives accurately without splitting delicate timber or damaging the screw head. Traditional single-thread wood screws often demand extensive pilot drilling and can wander on initial contact, which risks marring finished decorative surfaces. When working with thin sections or hanging slim surface-mounted hardware, you need a fastener that bites immediately and pulls completely flush without deforming the surrounding grain.
The 8 x 1/2" Pozidriv CSK Wood Screws Zinc (Box of 200) supply an efficient solution for everyday trade and joinery tasks. Built with a classic twin-thread pattern and a single lead point, these screws achieve immediate engagement in softwoods, sheet boards, and plugged masonry installations. The double countersunk head reinforces the transition between the shank and the head, preventing shearing under torque whilst ensuring a neat, flat finish beneath flush hardware fittings.
Supplied in a handy trade box of 200 pieces, these compact gauge 8 fasteners measure approximately 12mm in length. The bright zinc plated finish provides a clean visual appearance alongside dependable indoor corrosion protection. Whether you are installing piano hinges, attaching cabinet brackets, or securing small architectural fittings, these versatile wood screws deliver dependable holding power with minimal drive effort.
Stage by Stage Installation and Engineering Benefits
Stage 1: Precision Centring
A sharp 25 degree point allows the screw to establish an immediate centre mark. The single lead start bites into softwood surfaces straight away, eliminating the annoying skidding that can scratch delicate hardware or adjacent timber facings.
Stage 2: Rapid Thread Insertion
Twin 60 degree threads travel down the parallel shank with double the speed of a standard single thread. Each turn draws the screw forward smoothly, reducing installation fatigue when securing multiple fittings on a single work piece.
Stage 3: Slip Resistant Drive
The machined Pozidriv PZ2 recess provides firm bit engagement. Parallel contact ribs reduce driver cam-out under torque, preserving the head recess and preventing slips that can cause unsightly gouges across freshly painted or polished timber.
Stage 4: Flush Double Countersink
The double countersunk head incorporates added metal thickness beneath the perimeter. This structural reinforcement prevents head shear when driving into tough timber whilst seating the top face perfectly level with countersunk hardware recesses.
Key Applications and Trade Versatility
The compact half inch length of these gauge 8 wood screws makes them especially practical where screw penetration depth must be strictly limited. Thin face frames, carcass backs, lightweight ironmongery plates, and decorative beading demand a screw that grips securely without breaking through the opposite face of the board.
- Fixing continuous piano hinges, butt hinges, and small latch keeps to timber door jambs or cabinet carcasses.
- Securing secondary hardware, such as surface bolts, escutcheons, cable management clips, and small shelf brackets.
- Installing internal joinery components where base materials measure only 15mm to 18mm in total thickness.
- Light duty fixing into solid masonry, brick, or blockwork when paired with a matching colour coded plastic wall plug.
- General repair work throughout workshop cabinetry, trade vehicles, shopfitting assemblies, and timber furniture framing.
Detailed Specifications
| Specification | Rating or Standard | Practical Details |
|---|---|---|
| Imperial Size | 8 x 1/2 Inch | Traditional imperial sizing for light joinery and small ironmongery plates |
| Metric Size Equivalent | 4.0mm x 12mm | Standard metric dimensions for modern workshop and site drawings |
| Drive Type | Pozidriv PZ2 | Requires a standard No.2 Pozi driver bit for maximum torque transfer |
| Head Profile | Double Countersunk | Reinforced under-head section resists high installation shear stresses |
| Thread Geometry | Twin Thread 60 Degree | Twin helical starts accelerate driving speed and improve pull-out resistance |
| Point Angle | 25 Degree Sharp Point | Pierces softwood grain quickly to facilitate instant thread pickup |
| Protective Coating | Bright Zinc Plating | Provides corrosion resistance for internal joinery and clean presentation |
| Packaging Quantity | Box of 200 | Sturdy cardboard box designed for toolbox storage or trade counter stock |
Professional Installation Advice
To achieve clean, professional results with these short twin-thread screws, select a fresh PZ2 driver bit in good condition. Worn screwdriver bits or mismatched Phillips bits allow rotational play, which can lead to slippage and scratch your hardware plates. Keep your cordless drill or driver aligned directly in line with the screw shank during the entire drive stroke.
Whilst softwoods generally accept these self-starting screws without pre-drilling, drilling a small pilot hole is recommended when working close to the end grain of timber or when driving into dense hardwoods like oak or ash. Pre-drilling prevents sudden timber splitting and guarantees that the screw draws up tight without overstressing the wood fibers.
Need Guidance on Fixings and Hardware?
If you are uncertain whether this gauge and length combination suits your specific timber application or ironmongery project, our experienced technical team is ready to assist you.
Contact Our TeamSpecification
| Manufacturer | Timco |
|---|---|
| Finish | Zinc |

