Chrome Plastidome Screw Caps To Suit No 6 & 8 (Bag of 100)
In stock
Delivery Information
| Delivery Time Frame | Delivery Information |
| Next Working Day By 1PM | When an order is placed by 3pm for next working day on certain items |
| Standard Delivery | Usually delivered in 2 to 4 working days |
| Delivery Charges | |
| UK Mainland | Prices start at £3.95 for very small items, £6.50 for small, £9.50 for medium and £20 for large/long items |
| Scottish Highlands & Islands, Northern Ireland & Ireland | Prices from £30, please see our delivery page for more info. |
See our full range:
Description
Professional Screw Concealment with Chrome Plastidome Screw Caps
Exposed fixings can quickly compromise the visual appeal of a carefully planned installation. Whether you are assembling bespoke retail displays, fitting modern bathroom joinery, or securing commercial wall panelling, unfinished screw heads often look untidy. In addition to aesthetic drawbacks, unshielded screws remain vulnerable to everyday environmental challenges, including surface corrosion, moisture buildup, and accidental snagging. Securing a clean finish requires a dependable capping method that stays firmly in place during daily use.
The Chrome Plastidome Screw Caps To Suit No 6 & 8 offer an efficient two-piece solution that resolves these challenges seamlessly. Each set combines a durable plastic retaining washer with a smooth clip-on dome cover. When you drive your screw through the washer into the substrate, the base forms a stable foundation. The high-shine chrome cap then snaps directly over the top, completely enclosing the fixing. This method conceals standard countersunk screw heads behind an attractive, mirror-like gloss cover that elevates the overall quality of your work.
Supplied in a generous bag of 100 units, these caps provide cost-effective uniformity across extensive installation projects. They fit traditional Imperial gauges 6 and 8, which correspond to metric screw shank diameters between 3.5 mm and 4.2 mm. Tradespeople, shopfitters, and DIY enthusiasts can rely on this simple hardware accessory to deliver a protective seal and an immaculate surface presentation on every single job.
Step-by-Step Installation Pipeline
Stage 1 Screw and Washer Alignment
Begin by selecting a compatible countersunk screw in gauge 6 or 8. Thread the screw directly through the central aperture of the Plastidome retaining washer. Make sure the raised outer rim faces outward so the decorative cap can engage properly once the fixing is fully tightened against your mounting material.
Stage 2 Substrate Fixing
Drive the screw securely into your pilot hole or wall plug using standard hand or power tools. Tighten until the screw head seats neatly inside the base cup of the washer. Avoid excessive over-tightening so the washer retains its circular profile and provides an even seating edge for the top cover.
Stage 3 Dome Cap Engagement
Position the chrome dome directly over the secured retaining washer. Apply firm, steady thumb pressure to the centre of the cap until you feel it clip securely into position. The positive mechanical fit creates a strong joint that resists vibrations and accidental knocks during everyday room use.
Stage 4 Final Wipe and Inspection
Wipe the finished surface with a soft, clean microfibre cloth to remove any installation fingerprints or dust. Inspect the perimeter of each cap to confirm a flush, snug seating against the surface, ensuring a uniform and professional presentation across your entire fixture.
Key Practical Benefits
- Two-piece design ensures the cap remains firmly anchored to the underlying fixing without the need for adhesives or messy glues.
- Protects steel fixing heads from indoor humidity and moisture buildup, helping reduce surface oxidisation over time.
- Sleek gloss chrome appearance coordinates seamlessly with modern polished ironmongery, bathroom fittings, and mirror clips.
- Convenient bag quantity of 100 pieces provides sufficient hardware for substantial fit-outs, cabinetry runs, or multiple domestic tasks.
- Smooth dome profile eliminates exposed, sharp screw edges, making surrounding surfaces safer to clean and maintain.
Technical Specifications
| Specification | Rating or Standard | Practical Details |
|---|---|---|
| Product Type | Plastidome Two-Piece Fixing Cap | Consists of an interlocking base washer and snap-on dome cover |
| Screw Gauge Fit (Imperial) | No 6 to No 8 | Compatible with standard imperial countersunk wood and twinthread screws |
| Screw Diameter Fit (Metric) | 3.5 mm to 4.2 mm | Suits popular general-purpose screw diameters used across UK joinery |
| Surface Finish | Gloss Chrome | Reflective chrome appearance suited for modern interior schemes |
| Material Construction | Moulded Polymer | Resilient, non-conductive plastic that resists moisture and household cleaning products |
| Pack Quantity | 100 Units | Supplied in a sealed polythene bag for straightforward storage in your tool bag |
Installer Tip for Uniform Results
When securing the retaining washer, ensure your drill or screwdriver is positioned straight. Driving screws at an angle can tilt the washer rim slightly, which makes snapping the chrome dome in place more difficult. Keeping the fixing perpendicular ensures a smooth, flush fit against your working surface every time.
Need Advice on Your Project Hardware?
If you are unsure whether these screw caps suit your specific fixing gauge or substrate requirements, our experienced architectural ironmongery team is on hand to guide you with practical recommendations.
Contact Our TeamSpecification
| Finish | Chrome |
|---|

