Union Strongbolt Oval Deadlock J21OVS Brass 76mm
In stock
Delivery Information
| Delivery Time Frame | Delivery Information |
| Next Working Day By 1PM | When an order is placed by 3pm for next working day on certain items |
| Standard Delivery | Usually delivered in 2 to 4 working days |
| Delivery Charges | |
| UK Mainland | Prices start at £3.95 for very small items, £6.50 for small, £9.50 for medium and £20 for large/long items |
| Scottish Highlands & Islands, Northern Ireland & Ireland | Prices from £30, please see our delivery page for more info. |
See our full range:
Description
Union Strongbolt Oval Deadlock J21OVS Brass 76mm
Selecting the right hardware for a timber door requires a balance between mechanical longevity and straightforward integration into existing joinery. This oval profile deadlock provides a practical solution for trade professionals and homeowners who need a reliable locking point that fits into common UK mortice dimensions without requiring extensive door alterations. By focusing on a clean profile and consistent mechanical action, it serves as a foundational component for security on internal or external doors where an oval profile cylinder is preferred for key control or restricted access needs.
The brass finish offers a classic aesthetic that complements traditional door furniture while the red powder-coated steel case provides internal protection against everyday wear and atmospheric conditions. It delivers consistent operation because the internal components are engineered to handle the stresses of daily locking and unlocking cycles. This unit brings a high level of dependability to any renovation project or maintenance cycle where the goal is to secure a doorway using time-tested locking standards that contractors trust for residential and commercial sites.
Why Choose the Union Strongbolt Oval Deadlock J21OVS Brass 76mm
This deadlock streamlines installation while providing reliable security for standard timber doors across a range of site requirements.
Anti-Saw Protection
Hardened steel pins are integrated into the internal mechanism so that the bolt remains protected against unwanted intrusion attempts. These specific components resist common tools used during forced entry, which adds a significant layer of confidence for those responsible for protecting properties throughout the day and into the night with consistent mechanical force.
Fire Door Compliance
This lock carries full certification for use on both 30 and 60 minute fire doors, which is essential for meeting building regulations in multi-occupancy or commercial buildings. You can be assured that the product maintains its structural integrity when installed correctly according to the provided fire door specification and door leaf material requirements.
Efficient Installation
The radius inner forend is specifically designed to allow for a quick setup in many common UK door mortices without needing to adjust your existing door edge profiles. This feature saves time during the fitting process because it eliminates unnecessary carpentry work, which makes it a preferred choice for busy tradespeople and professional maintenance teams.
Engineering Quality and Daily Performance
Precise manufacturing standards keep the locking action smooth and the structural integrity intact over many years of heavy use.
Internal Mechanism and Force Distribution
The chamfered bolt design is a core element of the mechanical build because it helps the lock perform better under side load pressure. When a door is under tension or slightly misaligned, this shape allows the bolt to engage with the keep without excessive friction, so the key turn remains light and easy for the user.
Furthermore, the 14mm deadbolt offers a solid projection that provides positive locking. The internal components are housed within a red powder-coated steel case which protects the spring-loaded parts from dust and debris ingress. This design choice keeps the movement fluid, which stops the mechanism from sticking after long periods of inactivity or high-frequency usage in busy areas.
Weather Resistance and Long-Term Finish
The forend and striking plate are finished in polished brass to provide a clean look that matches modern and classic door handles alike. This surface treatment is selected for its ability to resist the dulling effects of frequent handling, which keeps the entrance looking professional long after the initial fitting is completed on your site.
Because the internal case is steel, it provides a stable environment for the brass components to operate. This combination of materials is deliberate, as it balances the need for a decorative finish on the exterior with the requirement for a strong, corrosion-resistant internal housing that stands up to the varying temperature and humidity levels inside a door leaf.
Installation and Operational Workflow
Follow these steps to ensure the lock functions correctly and provides maximum security for the door leaf.
Preparation and Morticing
Begin by marking the position of the deadlock on the door edge, ensuring the 57mm backset aligns with your requirements for the door style. Use a sharp chisel to clear the mortice pocket, taking care to match the radius of the faceplate so that it sits flush against the edge of the timber.
Cylinder Integration
Insert the oval profile cylinder into the lock case, securing it with the provided grub screw or retaining bolt. Check that the key operates freely from both sides of the door before fully tightening all mounting hardware, as this ensures the internal cams are correctly aligned for smooth daily operation.
Strike Plate Alignment
Fix the strike plate to the door frame, using the deadbolt position to mark the exact centre of the opening. It is important to adjust the frame mortice until the bolt enters the hole cleanly without rubbing, as this prevents premature wear on the locking mechanism and keeps the door closing smoothly.
Expert Installation and Care Tip
When installing the lock, ensure the door is properly hung and does not drag, as a misaligned door places unnecessary stress on the deadbolt. A light wipe with a dry cloth periodically helps maintain the polished brass finish and prevents the build-up of oils from hands that could otherwise affect the appearance over time.
Technical Specifications
| Feature | Rating / Standard | Practical Details |
|---|---|---|
| Case Depth | 76mm | Standard depth for most internal and external door applications. |
| Backset | 57mm | Distance from the edge to the cylinder centre for alignment. |
| Fire Rating | 30 / 60 Min | Compliant for use on tested fire door assemblies. |
| Faceplate Size | 134mm x 26mm | Provides a secure mounting surface on the door edge. |
| Bolt Throw | 14mm | Ensures positive locking engagement with the door frame. |
Longevity and Trade Reliability
These locks are built to withstand the rigours of daily traffic, providing a consistent service life for residential or light commercial properties. The combination of tested materials and proven design makes this an excellent choice for any door hardware upgrade project.
Compatibility and Fitting Notes
Specification
| Manufacturer | Union |
|---|---|
| Finish | Polished Brass |
| Guarantee | 10 Year |
| Lock Type | Mortice Deadlock |
| Lock Operation | Oval Cylinder |
| Lock Backset | 57mm |
| Follower Size (mm) | N/A |
| Faceplate Width | 26mm |
| Environmental Suitability | All |
| Mechanism | 1 Dead Bolt |
| Door Material Suitability | Wood |
| Max Door Thickness (mm) | 54 |
| Forend Finish | Polished Brass |

